MADRIX STELLA
£306.04
VAT included
The MADRIX STELLA is a DMX controller supporting RDM and up to 2 universes in or out connected via USB or Ethernet
The MADRIX STELLA is a dedicated control interface for DMX512 and Art-Net or Streaming ACN that is designed for high quality and practicability in permanent LED installations.
Directly connect DMX512 to the two 3-pin screw terminals to distribute 2 DMX universes per unit as input and/or output, eliminating the need for XLR connectors as a result. Simply use several units at the same time for larger projects.
Using MADRIX software and NEBULA hardware together allows you to fully synchronize Art-Net data across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.
Power is supplied via USB or 5V to 24V over a 2-pin screw terminal. The device is ready within seconds after startup. HTP Merging is automatically available for two Ethernet sources. Its firmware is upgradable and you can access and change specific device settings using the built-in web configuration page.
Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.
Connectivity:
- 2x DMX-IN/OUT (via pluggable screw terminals)
- 2x RJ45 Ethernet ports
- 1x USB port
- 1x Power (via pluggable screw terminal)
Package Contents:
- 1x MADRIX STELLA
- 1x Set of screw terminals (2x 3-pin and 1x 2-pin)
- 1x Power supply and world adapters kit
- 1x USB cable
- 2x Wall-mount brackets
The MADRIX STELLA is a DMX controller supporting RDM and up to 2 universes in or out connected via USB or Ethernet