The MADRIX NEBULA is a flexible LED pixel tape driver to directly control a wide range of LEDs
The MADRIX NEBULA features an advanced SPI decoder that receives control data over Ethernet or USB and directly converts DMX to SPI without the need for an additional interface.
Each device drives up to 1,360 RGB pixels (maximum 680 pixels per port) while ensuring responsive delivery of high-quality signals to each individual LED providing excellent image quality. A signal frequency of up to 24 MHz is available and you can choose the output protocol separately for each of the two ports.
Using MADRIX software and NEBULA hardware together allows you to fully synchronize Art-Net data across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.
Power is supplied via USB or 5V to 24V over a 2-pin screw terminal. The device is ready within seconds after startup. HTP Merging is automatically available for two Ethernet sources. Its firmware is upgradable and you can access and change specific device settings using the built-in web configuration page.
Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.
APA101 / APA102 / APA104 / APA106 / GS8207 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 /P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 /TM1814 / TM1829 / UCS1903 / UCS2903 / UCS512B3 / UCS8904 / UCS9812S / WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S
- 2x OUT (via pluggable screw terminals)
- 2x RJ45 Ethernet ports
- 1x USB port
- 1x Power (via pluggable screw terminal)
- 1x MADRIX NEBULA
- 1x Set of screw terminals (2x 4-pin and 1x 2-pin)
- 1x USB cable
- 2x Wall-mount brackets
- Max DMX Out